1. Burning Software
2. Burning Files 1016

Firmware update instructions

1. Extract the files from the compressed package.

2. Run the executable file:Start  PhoenixCard.exe .

3. Connect the hardware:

• Insert the card reader into your computer.
• Connect a MicroSD card to the reader.

4. Software interface:
The PhoenixCard interface will appear as shown below:
(Insert screenshot/image of the interface here)

5.Select the firmware:
In the pop-up dialog box, choose the firmware file to update.

6. Recording mode settings:

• Select the "Mass card production" mode.
• Click "Record" to start the process.

7. The update is complete:

• Insert the card into your device.
• Turn on the device to start the automatic update (a progress bar will be displayed).
• At the end:
  
  • Turn off the device
  • Remove the card
  • Turn the device back on to start normally.

Warning: After the update is complete, the device will automatically power on in approximately 1 minute. Do not restart the device during this process, as this could cause the update to fail and result in a black screen.

Before we begin

• Check your current firmware version.
• The most recent version is v0.0.9 (released in July 2025).

For devices purchased BEFORE July 4, 2025 (with firmware v2.0.1):

• First you must update to v0.0.5 using a MicroSD card → [ Download v0.0.5].
• After installing v0.0.5, subsequent updates can be performed wirelessly (OTA).

For devices purchased AFTER July 4, 2025:

• Direct OTA update is supported (no need to use a MicroSD card).

📄 Download Update File v0.1.5 (2025-10-21)

Update details:

• Certain known problems have been optimized.
• The evaluation criteria for the latitude and longitude parameters of GPS tracking in Motonavi have been modified.
• Support has been added for setting a 5.5-hour time zone.
• A countdown timer for shutdown and TF card malfunction notifications have been added.
• A notification has been added if the lens is not inserted.
• Collision detection has been disabled.
• It has been replaced with a new version of the boot logo.

Update procedure using a MicroSD card

1. Insert the MicroSD card into the target device and format it, or format it using a computer.
   

2. Extract the update files and copy all the contents of the folder to the newly formatted MicroSD card.
   

3. Power off the target device, insert the microSD card containing the update files, and then power it on. Wait for the update to complete. The device will automatically restart once it is finished.
   

OTA update procedure

Tip: To use OTA updates, the version must be at least V0.0.5.

1. Ensure the target device has a TF card inserted and a smartphone with mobile data (and the Motonavi app installed) is available. (Register an account if necessary.)
   

2. Open the Motonavi app on your smartphone, tap the OTA option on the main interface, and proceed with the OTA update. The app will transfer the update package to your device.
   

3. Once the update is complete, the device will display an update notification. Confirm the update and wait for it to finish. Do not operate the device during the update process.
   

1. Burning Software
2. Burning Tutorial
3. Burning Files:
   • Burning Files (2025.12.6)
   • Burning Files (2025.05) - Applies to C6 and C6 Pro devices from production batches from October 2024 to March 2025.

The update includes (2025.10.29):

1. Italian language support has been improved by correcting grammatical inaccuracies.
   
2. The date display format has been updated to Day-Month-Year.
   
3. A connectivity issue affecting iPhone devices updated to iOS 26 has been resolved.
   

Warning:

1. Do not turn off the device during the update process.
   
2. C6 firmware updates are only compatible with Windows-based computers.
   
3. If you want to keep your customized home screen, do not perform the update.
   

1. Burning Software
   
2. Burning Files 1119

Firmware update instructions

1. Extract the files from the compressed package.

2. Run the executable file : Start PhoenixCard.exe .

3. Connect the hardware:

• Insert the card reader into your computer.
  
• Connect a MicroSD card to the reader.
  

4. Software interface:
The PhoenixCard interface will appear as shown below:
(Insert screenshot/image of the interface here)

5. Select the firmware :
In the pop-up dialog box, choose the firmware file to update.

6. Recording mode settings:

• Select the "Mass production of cards" mode.
  
• Click on "Record" to start the process.
  

7. The update is complete:

• Insert the card into your device
  
• Turn on the device to start the automatic update (a progress bar will be displayed)
  
• After completing :
  • Turn off the device
  • Remove the card
    
  • Turn the device back on to boot normally

1. Burning Software
2. Burning Files 1211

Change log :

Connectivity for iPhone users who have updated to iOS 26 has been optimized.

Firmware update instructions

1. Extract the files from the compressed package.

2. Run the executable file : Start PhoenixCard.exe .

3. Connect the hardware :

• Insert the card reader into your computer.
  
• Connect a MicroSD card to the reader.
  

4. Software interface:
The PhoenixCard interface will appear as shown below:
(Insert screenshot/image of the interface here)

5. Select the firmware:
In the pop-up dialog box, choose the firmware file to update.

6. Recording mode settings:

• Select the "Mass production of cards" mode.
  
• Click on "Record" to start the process.
  

7. The update is complete:

• Insert the card into your device
  
• Turn on the device to start the automatic update (a progress bar will be displayed)
  
• After completing :
  • Turn off the device
  • Remove the card.
    
  • Turn the device back on to boot normally

1. Burning Software
   
2. Burning BM v2.0(1030) Files

Change log (V2.0):

• The home screen user interface was updated by removing the border frame.
• Improved German language translations
• Improved German language translations
• Tire pressure warning values ​​modified to allow independent adjustments for the front and rear wheels.
  

Firmware update instructions

1. Extract the files from the compressed package.

2. Run the executable file : Start PhoenixCard.exe .

3. Connect the hardware:

• Insert the card reader into your computer.
  
• Connect a MicroSD card to the reader.
  

4. Software interface:
The PhoenixCard interface will appear as shown below:
(Insert screenshot/image of the interface here)

5. Select the firmware:
In the pop-up dialog box, choose the firmware file to update.

6. Recording mode settings:

• Select the "Mass production of cards" mode.
  
• Click on "Record" to start the process.
  

7. The update is complete:

• Insert the card into your device.
  
• Turn on the device to start the automatic update (a progress bar will be displayed).
  
• After completing :
  • Turn off the device.
    
  • Remove the card.
    
  • Turn the device back on to start normally.
    

The positive and negative terminals of the reducer cable connect to the positive and negative terminals of the motorcycle's power supply, and the ACC cable connects to the motorcycle's ignition cable.

In the settings, the last icon has a QR code that you can scan to download the app. Once installed, you can use the app to view recorded videos and save them to your phone.

Remove a layer of stickers on the back of the remote control to reveal the screws. You can replace the battery with a new one by removing the screws marked in a box.